| Fill in the fields with as much information known as possible, and press the submit button at the end of this form to mail it to the sales department. If this is a rush delivery, contact the sales department at (949) 248-7815 and make them aware that the Quotation is in their mailbox. |
| Contact Information |
| Contact Name: |
|
| Company: |
|
| Street Address: |
|
| Street Address 2: |
|
| City: |
|
| ST |
Zip |
| Phone: |
|
| Fax: |
|
| Email: |
|
| Receive Quote Via: |
|
| Quote Information |
 |
| Part Name/No. (ie, 1999A): |
|
| Revision (ie, A): |
|
| Number of Layers (ie, 8): |
|
| Board Thickness (inch) (ie, 0.062+/-0.008): |
|
| Board Dimension (inch) (ie, 6x3): |
|
| Panel Dimension (inch) (ie, 13.3x7.3): |
|
| Plate through holes: |
Yes No |
| # of Boards per Panel: |
|
| Type of Base Material: |
|
| Outer-Layer Finished Copper (oz): |
|
| Inner-Layer Copper (oz) |
| (1) Power and Ground Layers: |
|
| (2) Other Inner-Layers (ie, 0.5): |
|
| Minimum Track Width/Spacing (mil) (ie, 7/7): |
|
| Minimum Via-Holes (inch): |
|
| # of Non-Blind Via-Holes per Board: |
|
| # of Blind Holes per Board: |
| (1) (ie, 100 between L1 and L3): |
|
| (2) (ie, 100 between L6 and L8): |
|
| # of Total Holes per Board: |
|
| # of Slots: |
|
| # of Mask Sides: |
|
| # of Legend Sides: |
|
| Minimum Copper Thickness in Holes (mil): |
|
| SMT Lands on One or Both Sides? |
|
| ACCUFRAME: Would You Like to Try Laser Stencil at No Cost?: |
Yes No |
| # of Surface Mount Pads: |
|
| Minimum SMT Chip Size (mil) (ie, 10+10): |
|
| # of SMT Lands per Board: |
|
| Controlled Impedance (ohm) |
| (1) (ie, 100+/-10% on L1): |
|
| (2) (ie, 50+/-10% on L4 and L5): |
|
| (3) (ie, 75+/-10% on L8): |
|
| Hot-Air Solder Leveling?: |
Yes No |
| Solder Reflowing?: |
Yes No |
| Carbon Ink Coating?: |
Yes No |
| Whole-Panel Flash Gold Plating?: |
Yes No |
| Selective Flash-Gold Plating?: |
Yes No |
| Selective Hard-Gold Plating?: |
Yes No |
| Hard-Gold Plating for Fingers?: |
Yes No |
| Minimum Gold Thickness (micro-inch): |
|
| # of Gold Edges: |
1 2 |
| Number of Gold Fingers per Board: |
|
| Entek Prefuluxing?: |
Yes No |
| Color and Type of Solder Mask (ie, Green LPISM): |
|
| Color of Peelable Mask: |
|
| Silkscreen Legend? (ie, white on both sides): |
|
| Logo & UL Mark of the Vendor? (ie, etched on L8): |
|
| Routing?: |
Yes No |
| Array Size: |
|
| V-Scoring?: |
Yes No |
| Punching?: |
Yes No |
| Beveling for Gold Fingers?: |
Yes No |
| Electrically Testing?: |
Yes No |
| Standard (ie, IPC Class II/B): |
|
| Quantity (per shipment, month, or year) |
| I (ie, 8 boards as prototypes): |
|
| II (ie, 30,000 boards/mo): |
|
| III (ie, 50,000 boards/mo): |
|
| FOB/CIF Place Required (ie, FOB Hong Kong): |
|
| How Many X-outs Are Allowed?: |
|
| Target Price |
| (1) (ie, Free for prototypes): |
|
| (2) (ie, US $8.80/brd for qty II): |
|
| (3) (ie, US $8.70/brd for qty III): |
|
| Expected Lead Time (ie, 5 weeks): |
|
| Other Info/Requirements Enclosed?: |
|
| Other Requirements: |
|
|
|
|
